YOKOGAWA WT332E User Manual page 104

5.3 Producing D/A Output
Rated Integration Time
1.
Minutes
(Display C)
6.
The same as
operation 4.
Note
If you operate this instrument frequently to configure settings such as the D/A output items and rated
integration time, you can connect this instrument to a PC and use WTViewerFreePlus to easily configure
settings from the PC.
Explanation
D/A Output
You can output voltage, current, active power, apparent power, reactive power, power factor, phase
angle, frequency, voltage peak, current peak, and integrated values using a ±5 V FS DC voltage.
Number of Channels
The number of channels varies depending on the specific option that is installed.
• /DA4 option on the WT310E/WT310EH: 4 channels
• /DA12 option on the WT332E/WT333E: 12 channels
Output Format
You can select a preconfigured output format or configure your own original format.
Using the Default Settings
Select one of the default settings to output preconfigured (default) items.
Default Values for Normal Measurement: dFLt-n
Select this setting to output normal measured values. The output settings are as follows:
Output Channel
1 These channels cannot be set.
2 The numbers are used to indicate input elements 1, 2, and 3.
5-6
Select the rated integration time.
(Display B)
2.
Seconds
7
(Display D)
.
8.
The same as
operation 4.
Suffix Code
Product Name
ch1
ch2
ch3
ch4
ch5
ch6
ch7
ch8
ch9
ch10
ch11
ch12
Hours
3
. (Display B)
4.
Press and
Press
9 10.
.
Confirm the
setting.
/DA4 /DA12
WT310E WT332E
WT310EH
U1 U1
I1 -
P1 U3
fU UΣ
1
I1
-
I3
IΣ
P1
-
P3
PΣ
5
.
to set the number.
to move the digit.
Close menu.
WT333E
U1
U2
U3
UΣ
I1
I2
I3
IΣ
P1
P2
P3
PΣ
IM WT310E-02EN