Producing D/A Output - YOKOGAWA WT332E User Manual

5.3

Producing D/A Output

Procedure
Follow the procedure indicated by the thick lines in the following menu.
Setting the D/A Output Format
Select the D/A output feature.
1.
2.
Set the output
channel.
(Display B)
6, 12.
Only on the
WT332E/WT333E
13 14.
.
Confirm
the setting.
1 The number of channels varies depending on the specific option that is installed.
• /DA4 option on the WT310E/WT310EH: 4 channels
• /DA12 option on the WT332E/WT333E: 12 channels
2 When you press SET in step 11, the output channel shown in display B changes to the next channel. For
example, ch1 changes to ch2.
3 The numbers (element numbers) that you can select vary depending on the model. For details, see
"Explanation" in this section.
IM WT310E-02EN
(Display B)
Select the output format.
3.
4.
Set the output item.
7
.
(Display C)
8.
Confirm
the setting.
1
Close menu.
A B
8.
Press and
On the WT332E/WT333E, select the element in the following steps 9 and 10.
9.
Press
10.
Press
5
(Display C) .
Confirm the setting. Close menu.
(Default setting)
(original
configuration)
11
.
2
Confirm
the setting.
to set area A (the output function).
to move to area B.
and to select an element (you cannot select an element for
6.
5-5
1
2
3
4
5
6
7
App
Index
3
).