Network Setup Menu - Furuno 1833 Installation Manual

3.2

NETWORK SETUP Menu

To communicate with other NavNet equipment, this setting should be done.
1. Open the INSTALL SETUP menu.
2. Press the NETWORK SETUP soft key.
3. Select menu option and press the [ENTER] knob or EDIT soft key. For example, select
HOST NAME.
4. Use the trackball or [ENTER] knob to select location and rotate the [ENTER] knob to set
character (or value).
5. Press the [ENTER] knob or ENTER soft key to finish.
6. Repeat steps 3-5 for other items.
7. Press the [MENU] key to finish.
8. Continue next setup.
3-2
IP ADDRESS
172.031.003.002
HOST NAME
RADAR________
RADAR SOURCE
RADAR________
CHART SOURCE
______________
______________
______________
SOUNDER SOURCE
SOUNDER_____
SUBNET MASK
255.255.000.000
GATEWAY ADDRESS
000.000.000.000
OFFSET PORT NUMBER
10000
NavNet SETUP menu
HOST NAME
R A D A R _ _ _
Host name window
NETWORK
SETUP
EDIT
RETURN