Appendix A. Functions Of Controlling; Devices - Visonic rMaster-360 User Manual

Appendix A. Controlling device functions
A1. KP-160 PG2
Arming and disarming the system
Step
1 Select a PARTITION
(if Partition is enabled)
2 Arm AWAY
Arm HOME
Disarm (OFF)
3 Quick arm AWAY
(If Quick Arm is enabled)
Quick arm HOME
(If Quick Arm is enabled)
4 INSTANT
LATCHKEY
Initiating alarms
Alarms
Emergency alarm
( 2 sec.)
Fire alarm
( 2 sec.)
Panic alarm
( 2 sec.)
Zone status
Alarms
For NOT READY ( ) /
BYPASSED ( )
Zone status when working with partitions
Alarms
For NOT READY ( ) /
BYPASSED ( )
D-307082 PowerMaster 360 User's Guide
Operation
Actions Response
See section
3.3. in KP-160
PG2 User's
Guide
Response
Response
/ /
User Actions
Any combination of
+ [ ]
+ [ ]
+ [ ]
( 2 sec.)
( 2 sec.)
(After arming HOME/
AWAY)
(After arming AWAY)
When pressing the Fire or Emergency icons, the
KP-160 PG2 starts beeping. After pressing the
button for approx. 2 seconds, the KP-160 PG2
sends the command.
When pressing the Fire and Emergency icons
together, the KP-160 PG2 starts beeping. After
pressing the button for approx. 2 seconds, the
KP-160 PG2 sends the Panic command.
Upon each press of the
appears on the zone # display,
Upon each press of the
assigned to the pressed Partition number appears on the
zone # display, .
APPENDICES
Keyboard & Panel
Response
The selected key blinks.
The selected key and the
"Present Prox Tag" icon (
) begin to blink and
prompt you to present
your Tag.
The keypad's LED blinks
red once to indicate
transmission of the
arming command to the
control panel.
The LED and the buzzer
then indicate the control
panel's response – see
KP-160 PG2 User's Guide,
"System Status and
Indications" section 3.3.
Notes
Notes
key, the next zone number
.
Notes
key, the next zone number
51