Table of Contents
Advertisement
ELECTRICAL APPLIANCE CONTROL
Arming AWAY or HOME 'Instant'
Pressing
during the exit delay arms the system immediately without a delay. Therefore, any detection in
any zone triggers an immediate alarm. To arm AWAY-INSTANT, proceed as follows.
PRESS
Vacate the premises
ARM indicator lights during the armed state.
Forced arming AWAY or HOME
Forced arming allows you to arm the system even if the system is "NOT READY". Any open zones will be
bypassed for the duration of arming.
Note: When forced arming is carried out, the buzzer "protests" by emitting a continuous tone during the exit
delay until the last 10 seconds of the delay. You can silence this signal by pressing the arming button again.
If forced arming is enabled and you wish to arm the system when NOT READY is displayed, complete the
following steps:
PRESS
[Enter code] /
[Present tag]
(to mute the buzzer)
Vacate the premises
ARM indicator lights during the armed state.
10
RESULTING DISPLAY
ENTER CODE
_ _ _ _
Code
ARMING AWAY
ARMING INSTANT
(alternating)
PLEASE EXIT NOW
(Exit delay)
AWAY
RESULTING DISPLAY
ENTER CODE
_ _ _ _
Code / Present tag
ARMING AWAY
PLEASE EXIT NOW
(Exit delay)
AWAY
Remember: Forced arming compromises security!!
D-307082 PowerMaster 360 User's Guide
Advertisement
Table of Contents
