Visonic rMaster-360 User Manual
  1. Manuals
  2. Brands
  3. Visonic Manuals
  4. Security System
  5. rMaster-360
  6. User manual

Visonic rMaster-360 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Table of Contents

1. Introduction .................................................... 3
Preface ......................................................... 3
Overview ....................................................... 3
System Features ........................................... 3
VisonicGO Controls ...................................... 5
Screen Saver Mode ...................................... 7
Proximity Tags .............................................. 7
Users and Codes .......................................... 7
Preparing to Arm ........................................... 8
Arming 'AWAY' / 'HOME' .............................. 8
Disarming and Stopping Alarm ..................... 8
Disarming under Duress ............................... 9
Partition Selection Process ........................... 9
Switching from 'HOME' to 'AWAY' ................ 9
Switching from 'AWAY' to 'HOME' ................ 9
Arming AWAY or HOME 'Instant' ................ 10
Forced Arming AWAY or HOME ................. 10
Arming in the Latchkey Mode ...................... 11
Initiating Panic Alarm .................................. 11
Chime ON/OFF ........................................... 12
Clearing the Memory Indication .................. 13
Troubles ...................................................... 13
General Indications ..................................... 14
Correcting Trouble Situations ...................... 15
4. Menus and Functions .................................. 16
Selecting a Setting Option .......................... 16
the USER SETTINGS Menu ....................... 18
B.4 Programming User Codes .................... 21
D-307082 PowerMaster 360 User's Guide
PowerMaster-360
User's Guide
B.6 Add / Delete Proximity Tags .................. 23
Reporting ..................................................... 30
.................................................................... 36
B.14 Serial Number ..................................... 36
B.15 PowerLink Parameters ........................ 41
Event notifications by SMS .......................... 42
Remote Control by SMS .............................. 43
Keyfobs ....................................................... 44
7. Testing the System ....................................... 45
Periodic Test ............................................... 45
Periodic Test per Partition ........................... 47
8. Maintenance .................................................. 49
Replacing the Backup Battery ..................... 49
Accessing 24-Hour Zones ........................... 49
Cleaning the Control Panel .......................... 49
Event Log .................................................... 49
Exiting the Event Log................................... 50
DEVICES ........................................................ 51
A1. KP-160 PG2 .......................................... 51
A2. KP-140/141 PG2 ................................... 52
A3. KF-234 PG2 .......................................... 53
APPENDIX B. PARTITIONING .......................... 54
B1. Selecting a Partition .............................. 54
B3. The Show Function ............................... 54
B4. Siren ..................................................... 55
B5. Partition Status display .......................... 55
B6. Common Areas ..................................... 55
1

Advertisement

Table of Contents
loading

Related Manuals for Visonic rMaster-360

Summary of Contents for Visonic rMaster-360

  • Page 1: Table Of Contents

    PowerMaster-360 User's Guide Table of Contents B.6 Add / Delete Proximity Tags ....23 1. Introduction ............ 3 B.7 Add / Delete Keyfob Transmitters ..25 Preface ............3 B.8 Setting the Time & Time Format ... 27 Overview ............3 B.9 Setting the Date &...
  • Page 2 APPENDIX C. GLOSSARY ....... 57 E4. Communication .......... 62 APPENDIX D. HOME FIRE ESCAPE PLANNING E5. Physical Properties ........62 ............... 60 E6. Peripherals and Accessory Devices ..62 APPENDIX E. SPECIFICATIONS ..... 61 APPENDIX F. COMPLIANCE WITH E1. Functional ..........61 STANDARDS ..........

  • Page 3: Introduction

    1. Introduction Preface The PowerMaster-360 is a highly advanced wireless alarm control system produced by Visonic Ltd. Note: Make sure that you have the name and telephone number of the monitoring station your system will report to. When calling the monitoring station to ask questions, you should have access to your ACCOUNT NUMBER to identify your alarm system.

  • Page 4: Powermaster-360 Panel Indicator

    INTRODUCTION within the protected area and send out an alert message if no movement is detected for a predefined period of time. See Chapter 4. Menus and for details.  Distress calls: Keyfobs may be used to activate this function by the simultaneous pressing of two buttons. ...

  • Page 5: Visonicgo Controls

    INTRODUCTION Virtual Keypad Controls Virtual Keypad Display Figure 1b. Virtual Keypad Controls and Display D-307082 PowerMaster 360 User's Guide...
  • Page 6 INTRODUCTION LED Icons Indication Function Power Armed Trouble Active service to the server Wi-Fi connection Control Keys Indication Function OFF: Delete a device NEXT: Advance from item to item within a given menu. BACK: Move one step back within a given menu. UP: Use to move one level up in the menu or to return to previous setting step.

  • Page 7: Virtual Keypad / Visonicgo Display

    INTRODUCTION Virtual Keypad display The Virtual Keypad display system status and events, time and date, programming instructions and also an event log file which is accompanied by the date and time of each event. The normal display alternates with the time and the system status, for example: READY HH:MM...

  • Page 8: Operating The Powermaster-360 System

    ELECTRICAL APPLIANCE CONTROL 2. Operating the PowerMaster-360 system For more information regarding terms used in this chapter, refer to Appendix C. Glossary . Basic arming and disarming Following are a set of procedures for performing basic arming and disarming of the alarm system. Preparing to arm Before arming, make sure that READY is displayed.

  • Page 9: Disarming Under Duress

    ELECTRICAL APPLIANCE CONTROL MEMORY message will disappear only upon rearming the system. To disarm the system, proceed as shown: PRESS RESULTING DISPLAY ENTER CODE _ _ _ _ [Enter Code] / Code / Present tag [Present tag] READY HH:MM ARM indicator extinguishes during the disarmed state. Disarming the system also stops the siren alarm, irrespective of whether the alarm was initiated during the armed or the disarmed state.

  • Page 10: Arming Away Or Home 'Instant

    ELECTRICAL APPLIANCE CONTROL Arming AWAY or HOME ‘Instant’ Pressing during the exit delay arms the system immediately without a delay. Therefore, any detection in any zone triggers an immediate alarm. To arm AWAY-INSTANT, proceed as follows. PRESS RESULTING DISPLAY ENTER CODE _ _ _ _ Code ARMING AWAY...

  • Page 11: Arming In The Latchkey Mode

    ELECTRICAL APPLIANCE CONTROL Forced arming “HOME” is performed in a similar manner, as follows: PRESS RESULTING DISPLAY ENTER CODE _ _ _ _ [Enter code] / Code / Present tag [Present tag] ARMING HOME PLEASE EXIT NOW  (Exit delay) ...

  • Page 12: Initiating Fire Alarm Or Emergency Alarm

    ELECTRICAL APPLIANCE CONTROL Initiating fire alarm or emergency alarm You can generate a fire alarm or a silent emergency alarm in disarmed & armed states, as follows: PRESS RESULTING DISPLAY FIRE ALARM EMERGENCY for 2 seconds Then, if or when the system is in the disarmed state: READY HH:MM (alternating)

  • Page 13: Reviewing Troubles And Alarm Memory

    REVIEWING TROUBLES AND ALARM MEMORY 3. Reviewing events and alarm memory Alarm and tamper memory history The PowerMaster-360 retains in its memory alarm and “tamper” events that occurred during the last arming period. Note: Alarm events are memorized only after the “abort period” (see Appendix C). This means that if you disarm the system immediately - before the abort period expires - there will be no memory indication A.

  • Page 14: General Indications

    REVIEWING TROUBLES AND ALARM MEMORY To review the source of the current problems one by one, click the button repeatedly as shown below: PRESS RESULTING DISPLAY PRESS RESULTING DISPLAY PowerMaster-360 Z15 MISSING (alternating) Z09 LOW BATTERY Z15 MOTION SENS (alternating) (alternating) Z09 CONTACT LIVING ROOM...

  • Page 15: Correcting Trouble Situations

    REVIEWING TROUBLES AND ALARM MEMORY Correcting trouble conditions The trouble indicator and flashing TRBL message are cleared after you eliminate the cause of fault. The table below describes the system faults and corresponding actions to take to resolve the problem. If you do not know how to correct a trouble situation, report it to your installer and seek their advice.

  • Page 16: Menus And Functions

    MENUS AND FUNCTIONS 4. Menus and functions This chapter explains the user programming features of your PowerMaster-360 system and allows you to tailor the PowerMaster-360 system according to your specific needs. All menu operations are performed using the Virtual Keypad, which contains the alarm system’s control keys, numerical keypad and display. The chapter is divided into two sections, as follows: Part A –...
  • Page 17 MENUS AND FUNCTIONS C. User settings options menu Click until the display reads the desired setting option and then press Use to bypass a faulty (exclude) or unsecured ("disturbed") zones, or to clear a SET ZONE BYPASS bypassed zone. For further details and programming procedure see section B.1. Use to quickly review the bypass scheme that is to see which zones are bypassed.

  • Page 18: Returning To The Previous Step Or Exiting The User Settings Menu

    MENUS AND FUNCTIONS A.2 Returning to the previous step or exiting the USER SETTINGS menu During the setting process it is frequently necessary to return to the previous setting step or option (i.e. "to go one level up") or to exit the User Settings menu. A.
  • Page 19 MENUS AND FUNCTIONS 1. Zones will be bypassed throughout one disarm-arm period only. Disarming the system after arming will  suspend the entire bypassing scheme but you can recall and reuse it as described in section B.3. 2. Fire zones cannot be bypassed. 3.

  • Page 20: Reviewing The Zone Bypass Scheme

    MENUS AND FUNCTIONS B.2 Reviewing the zone bypass scheme  Here you can quickly review the bypass scheme that is the zones that are set to be bypassed when the system is next armed. REVIEW BYPASS Enter the [USER SETTINGS] menu and select the [REVIEW BYPASS] option and press BYPASS LIST The display reads [BYPASS LIST]...

  • Page 21: Programming User Codes

    MENUS AND FUNCTIONS B.4 Programming User Codes PowerMaster-360 system allows you to authorize up to 48 people to arm and disarm the system by providing each with a unique 4 digit personal security code, and assigning them with different security levels and functionalities.
  • Page 22 MENUS AND FUNCTIONS A. To program a user code Enter the [USER SETTINGS] menu, select the [USER CODES] option and USER CODES press The first user code "User 01 Code" is displayed. User 01 Code  At the blinking cursor position, key in the User Code you wish to program , for example, [06] for user code 6, or alternatively click the button until the display reads, [User 06 Code].

  • Page 23: Programming The Duress Code

    MENUS AND FUNCTIONS B.5 Programming the duress code A duress alarm message can be sent to the monitoring station if you are forced to disarm the system. To initiate a duress message, you must disarm the system using a duress code. By default this code is 2580. A.
  • Page 24 MENUS AND FUNCTIONS To assign the tag to another user, for example, "User No. 5", key in [05] or alternatively click the button until the display reads T05:Tag (Prox) [T05:Tag (Prox)] and then press to confirm. ☺ Return to step 2 The display reads [ ] a "Success Tune"...

  • Page 25: Add / Delete Keyfob Transmitters

    MENUS AND FUNCTIONS You can now enroll another proximity tag. You can also select another option in the User Settings menu (see section A.1), or quit programming (see section A.2). If no proximity tag is enrolled in the system, the display reads [ NO EXISTING DEV.
  • Page 26 MENUS AND FUNCTIONS To assign the keyfob to another user, for example, "User No. 5", key in [05] or alternatively click the button until the display reads F05:keyfob [F05:Keyfob] and then press to confirm. ☺ The display reads [ ] or [ ] if the keyfob was ...

  • Page 27: Setting The Time & Time Format

    MENUS AND FUNCTIONS Additional Information (section B.7) For detailed instructions on how to select User Settings – refer to sections A.1 and A.2. The LED will extinguish after several seconds. In case of difficulties in communication with the control panel, the LED may blink for several seconds more while trying to establish communication. During this period of time the keyfob keys are disabled.

  • Page 28: Setting The Date & Date Format

    MENUS AND FUNCTIONS B. To set the time TIME 12:40P At the blinking cursor position, enter the correct time, for example, “8:55A”, using the numerical keypad. 3, 4 When you are satisfied with the setting, press to confirm. ☺ A "Success Tune"  sounds, the display reads the set time, returns to step TIME 08:55A...

  • Page 29: Enabling / Disabling Auto-Arming

    MENUS AND FUNCTIONS Additional Information (section B.9) For detailed instructions on how to select User Settings – refer to sections A.1 and A.2.  The display shows the currently selected format (indicated by a symbol), for example, "MM/DD/YYYY". You can now select either the "MM/DD/YYYY" or "DD/MM/YYYY" date format by pressing The display shows the Date and selected Date Format, for example, "...

  • Page 30: Programming Email, Mms And Sms Reporting

    MENUS AND FUNCTIONS Additional Information (section B.10 - B.11) For detailed instructions on how to select User Settings – refer to sections A.1 and A.2.  The display shows the current setting (indicated by a symbol), for example, [ ]. You can enable autoarm now select either to enable or disable auto-arming using the button.
  • Page 31 MENUS AND FUNCTIONS B. To program SMS telephone numbers REPORTED EVENTS Click the button until the display reads the SMS phone number you wish to program or edit (out of 4 SMS numbers), for example, "2nd SMS tel#", and press 2nd SMS tel# To program or edit the phone number, at the blinking cursor position enter 080168593...
  • Page 32 2nd E-MAIL Address When the display reads [Address], press To program or edit the email, at the blinking cursor position enter the email, info@visonic.com for example, “info@visonic.com”, using the alphanumerical keypad. 5, 6 When done, press to confirm. ☺ info@visonic.com A "Success Tune"...
  • Page 33 MENUS AND FUNCTIONS The display shows the currently selected option. disable report  Click the button until the display reads the event group you wish to be reported via SMS, for example, [alarm]. alarm When you are satisfied with the setting, press to confirm.
  • Page 34 MENUS AND FUNCTIONS To program or edit the MMS/SMS number, at the blinking cursor position 895283584 enter the MMS/SMS telephone number, for example, “895283584”, using the alphanumerical keypad. 5, 6 When done, press to confirm. ☺ 895283584 A "Success Tune"  sounds, the display confirms the MMS/SMS telephone number and returns to step 19.
  • Page 35 MENUS AND FUNCTIONS Additional Information (section B.12) For detailed instructions on how to select User Settings – refer to sections A.1 and A.2. This option allows you to program the events to be reported. To program SMS numbers, click the button until the display reads the desired option.

  • Page 36: Enabling / Disabling The Squawk Option

    MENUS AND FUNCTIONS B.13 Enabling and disabling the squawk option The PowerMaster-360 system (and its wireless sirens) can be set to produce a short "Squawk" of audible feedback to assist you when you use a keyfob to arm (1 beep) and disarm (2 beeps) the PowerMaster-360 system.
  • Page 37 MENUS AND FUNCTIONS Tuesday When the "day" to schedule appears on the display, press C. To Select the Activation No. The 1 operation (PGM output activation) of the scheduler is displayed. operation No 1 Click the button until the display reads the operation you wish to schedule, for example, "operation No 3".
  • Page 38 MENUS AND FUNCTIONS For detailed explanation of how to set the time - refer to Section B.8. To end this session and return to the previous "operation" menu, press the button. To select other menu options or to quit programming, follow the instructions in sections A.2 and A.3. Scheduler Table Device Device...
  • Page 39 MENUS AND FUNCTIONS C. To Adjust the Volume Level of the Exit Entry Beeps Click the button until the display reads [Exit Entry beeps], and press Exit/Entry beeps The display shows the currently selected option.  Click the button until the display reads the desired volume level for the Exit/Entry beeps, for example, [MAX].
  • Page 40 MENUS AND FUNCTIONS Additional Information (section B.15) For detailed instructions on how to select the Setting Options – refer to sections A.1 and A.2.  The display shows the currently selected setting (indicated by ), for example, " ". MID  a.

  • Page 41: Powerlink Parameters

    MENUS AND FUNCTIONS programming (see section A.3). B.17 PowerLink parameters The PLNK curr.params menu shows the current IP address, subnet mask, default gateway, and current mode of communication. The PowerLink information is for support purposes only.  Here you can read the current IP address of the PowerLink and other relevant data Carefully read the section titled "Additional Information"...

  • Page 42: Event Reporting And Control By Sms

    EVENT REPORTING & CONTROL BY TELEPHONE AND SMS 5. Event reporting and control by SMS Event notifications by SMS The PowerMaster-360 system when equipped with a GSM unit can be programmed to send SMS event notification messages to 4 pre-selected telephone numbers - see Chapter 4, B.12. The messages can be tagged with a "House ID"...

  • Page 43: Remote Control By Sms

    EVENT REPORTING & CONTROL BY TELEPHONE AND SMS Remote control by SMS PowerMaster-360 system with GSM unit can respond to SMS commands from any cellular telephone (a detailed SMS message sending process is described in the cellular telephone user’s guide). The various SMS commands are detailed in the following table.

  • Page 44: Special Applications And Functions

    SPECIAL APPLICATIONS AND FUNCTIONS 6. Special applications and functions Looking after people at home In addition to acting as an alarm system, the PowerMaster-360 can also be used to monitor the movement of people at home when the system is in the disarmed state (or even when armed “HOME” with perimeter protection only).

  • Page 45: Testing The System

    TESTING THE SYSTEM 7. Testing the system Periodic test The components of your security system are designed to be maintenance-free as much as possible. Nevertheless, it is mandatory to test the system at least once a week and after an alarm event to verify that all system sirens, detectors, keyfobs, keypads and other peripherals function properly.
  • Page 46 TESTING THE SYSTEM C. To display the temperature and light intensity TEMP/LIGHT TEST The display now reads [TEMP/LIGHT TEST]. To display the temperature or light intensity of zones on the control panel, press The panel reads the temperature and light intensity of each zone. The display Z01 24.5C alternates between the temperature, the light intensity, the sensor number and the sensor location.

  • Page 47: Periodic Test Per Partition

    TESTING THE SYSTEM Additional Information (Periodic Test) Display shown in disarm state when all zones are secured (00:00 or other digits show present time). If you have not already changed your personal code number, use the default setting – 1111. If the INSTALLER CODE is used to enter the Periodic Test instead of the USER CODE, the devices LED will also provide the link quality indication –...
  • Page 48 TESTING THE SYSTEM devices in the panel that have not been tested yet. This number automatically  drops one count for every tested device. Test per partition is performed by activating each device as explained in point DEVICE TESTS END 4 in the Additional Information table below.

  • Page 49: Maintenance

    AC power and this trouble state continues for more than a few hours, the battery may need to be replaced. An original Visonic battery must be used of which there are a number of types. For assistance in battery replacement, contact Technical Support.

  • Page 50: Exiting The Event Log

    MAINTENANCE READY 00:00 ENTER CODE:_ When the Virtual Keypad display reads [ENTER CODE: _], enter the current CODE master user code. LIST OF EVENTS The "Success Tune" will sound and the Virtual Keypad display will read [LIST OF EVENTS]. (see Important Note!) Click the button.

  • Page 51: Appendix A. Functions Of Controlling

    APPENDICES Appendix A. Controlling device functions A1. KP-160 PG2 Arming and disarming the system Step Operation User Actions Keyboard & Panel Response Select a PARTITION Any combination of The selected key blinks. (if Partition is enabled) Arm AWAY The selected key and the "Present Prox Tag"...
  • Page 52 APPENDICES A2. KP-140/141 PG2 Arming and disarming the system Step Basic Arming User Actions Keypad & Panel Response Select a PARTITION The selected button lights. (Partition enabled) The selected button starts blinking Arm AWAY and prompts you to enter your "User Code"...
  • Page 53 APPENDICES A3. KF-234 PG2 Keyfob functionality Step Functions User Actions Response Arm AWAY When executing a command, the keyfob's LED blinks red once to indicate transmission of the command to Arm HOME the control panel. If the operation is successfully completed, the green LED lights momentarily and a Disarm (OFF) "Success tune"...

  • Page 54: Appendix B. Partitioning

    APPENDICES Appendix B. Partitioning The control panel includes an optional partition feature. Partitioning is available only if your installer has enabled the feature. Once partitioning is enabled Partitioning menus are added to the system which can be viewed on the Virtual Keypad display. Partitioning allows you to divide the system into three independently controllable areas with different users assigned to each partition whereby each user can arm the partition to which they are assigned.

  • Page 55: B4. Siren

    APPENDICES B4. Siren A partition is alarmed when receiving an event from an alarmed device assigned to that partition. Alarmed devices do not affect partitions to which they are not assigned. A siren is common to all partitions; therefore, an alarm from one or more partitions will activate the siren.
  • Page 56 APPENDICES Table A1 – Common Area Definitions Common area zone types Definition Perimeter  Acts as defined only after the last assigned partition is armed AWAY or HOME.  In case that one of the partitions is disarmed, an alarm initiated from this zone is ignored for all assigned partitions.

  • Page 57: Appendix C. Glossary

    APPENDICES Appendix C. Glossary This list of terms is arranged in alphabetical order. Abort Period: When an alarm is initiated, the internal built-in sounder is activated first for a limited period of time which is the abort period set by the installer. If you cause an alarm accidentally, you can disarm the system within the abort period before the real sirens start and before the alarm is reported to the remote responders.
  • Page 58 APPENDICES Forced Arming: When any one of the system zones is disturbed (open), the alarm system cannot be armed. One way to solve this problem is to find and eliminate the cause for zone disturbance (closing doors and windows). Another way to deal with this is to impose forced arming - automatic de-activation of zones that are still disturbed upon termination of the exit delay.
  • Page 59 APPENDICES Smoke Detector, Wireless: A regular smoke detector and a wireless PowerG transceiver in a shared housing. Upon detection of smoke, the detector transmits its unique identification code accompanied by an alarm signal and various status signals to the control panel. Since the smoke detector is linked to a special fire zone, a fire alarm is initiated.

  • Page 60: Appendix D. Home Fire Escape Planning

    APPENDICES Appendix D. Home fire escape planning Fire can spread rapidly through your home, leaving you a short time to escape safely. Your ability to get out depends on advance warning from smoke detectors and advance planning - a home fire escape plan that everyone in your family is familiar with and has practiced.

  • Page 61: Appendix E. Specifications

    APPENDICES Appendix E. Specifications E1. Functional Zones Number 30 wireless zones. Installer and User Codes  1 master installer (9999 by default)*  1 installer (8888 by default)*  1 master user, no. 1 (1111 by default)  Users nos. 2 – 48 ...

  • Page 62: E3. Electrical

    PIR Camera Detectors: Next CAM PG2; Next CAM-K9 PG2 Note: A maximum of 15 PIR cameras are supported but the panel will communicate clips captured by the first 10 motion cameras to the Visonic PowerManage server. Smoke Detector: SMD-426 PG2, SMD-427 PG2...

  • Page 63: Appendix F. Compliance With Standards

    The full text of the EU declaration of conformity is available at the following internet address: http://www.visonic.com/download-center. WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance (Visonic Ltd.) could void the user’s authority to operate the equipment.

Table of Contents