Table of Contents
Advertisement
Tuesday
4.
C. To Select the Activation No.
5.
operation No 1
or
operation No 3
6.
D. To Set the ON (Start) Time
7.
Start-HH:MM
8.
TIME
10:00A
TIME
12:30P
9.
☺
Go to step 10
E. To Set the OFF (Stop) Time
10.
Start-HH:MM
or
Stop HH:MM
11.
TIME
01:30P
12.
TIME
04:00P
☺
Return to step 5
1
For detailed instructions on how to select the Setting Options – refer to sections A.1 and A.2.
2
To activate the selected device on every day of the week at the same time(s), use the "Daily" option.
Otherwise, use the
you wish to activate the PGM output. You can later repeat the process for other days of the week, if desired.
3
The display shows "
the day selected in the previous step. You can later repeat the process for the other 3 activations on the
selected day, if desired.
4
Here you can select either the "start time" or "stop time" using the
time in 10 minute intervals only. To erase a displayed time, press the
The screen also displays the selected time format.
5
The display shows the current start or stop time setting of the selected activation with the cursor blinking on
the first hour digit. If no time is programmed, the time display will be blank (- -:- - - ).
D-307082 PowerMaster 360 User's Guide
When the "day" to schedule appears on the display, press
3
The 1
st
operation (PGM output activation) of the scheduler is displayed.
Click the
wish to schedule, for example, "operation No 3".
When the "operation No." to schedule appears on the display, press
4
The "start time" screen is shown on the display.
To set the start time of the selected operation, press the
The display shows the current setting of the start time.
Use the numerical keypad to set or change the operation ON (start) time, for
example, "00:30P".
When you are satisfied with the setting, press
A "Success Tune"
and returns to the "start time" screen as in step 7.
To set the stop time, continue to step 10.
Click the
When the display reads the desired setting, press
The "stop time" of the selected operation is displayed.
Use the numerical keypad to set or change the operation OFF (stop) time, for
example, "04:00P".
When you are satisfied with the setting, press
A "Success Tune"
and returns to the "operation No" screen, as in step 5.
Additional Information (section B.14)
or
buttons to select the specific day (Sunday, Monday, Tuesday...etc)
" which is the first of the 4 ON/OFF time activations you can schedule for
operation No 1
MENUS AND FUNCTIONS
or
button until the display reads the operation you
6
☺
sounds. The display confirms the saved start time
or
button until the display reads "Stop-HH:MM".
6
☺
sounds. The display confirms the saved stop time
4
button.
5
to confirm.
to confirm.
5
to confirm.
7
or
button. Select the
button.
.
3
.
37
Advertisement
Table of Contents
