Table of Contents
Advertisement
MENUS AND FUNCTIONS
A.2 Returning to the previous step or exiting the USER SETTINGS menu
During the setting process it is frequently necessary to return to the previous setting step or option (i.e. "to go
one level up") or to exit the User Settings menu.
A. To move one level up
To move one level up during the setting process, click
previous setting step:
B. To exit the USER SETTINGS menu
Any screen
or
<OK> TO EXIT
READY 12:00
A.3 Keys used for navigation and settings
You can use the keypad for various programming functions. The following table provides a description of the
keys and their functions.
Button
Definition
NEXT
BACK
UP
OK
HOME
AWAY
OFF
0 - 9
B.1 Setting the zone bypass option
Bypassing permits arming only part of the system while allowing free movement of people within certain zones
when the system is armed. It is also used to temporarily remove from service faulty zones that require repair
work or to deactivate a sensor if, for example, you are decorating a room.
Here you can set the Zone Bypass Scheme i.e. to scroll through the list of registered (enrolled) sensors to
your PowerMaster-360 system and to Bypass (deactivate) faulty or disturbed sensors (either READY or
NOT-READY) or to Clear (reactivate) BYPASSED zones (sensors).
Once you have set a Bypass Scheme you can use the following 3 options:
>
To quickly review the bypassed zones – refer to section B.2.
>
To quickly clear a bypassed zone i.e. to reactivate the bypassed zone – refer to section B.1.
>
To repeat (recall) the last used zone bypassing scheme – refer to section B.3.
18
To exit [USER SETTINGS], move up the menu by pressing
until the display reads [<OK> TO EXIT], or preferably, press
brings you immediately to the exit screen [<OK> TO EXIT].
When the display reads [<OK> TO EXIT], press
The system exits the [USER SETTINGS] menu and returns to the normal disarm
state while showing the READY display.
Navigation / Setting Function
Use to move / scroll forward to the next menu options.
Use to move / scroll backward to the previous menu options.
Use to move one level up in the menu or to return to previous setting step.
Use to select a menu option or to confirm a setting or action.
Use to move one level up in the menu or to return to previous setting
step.
Use to jump back to the [<OK> TO EXIT] screen to quit programming.
Use to cancel, delete, clear or erase setting, data, etc.
Numerical keypad used to enter numerical data.
once. Each click takes you one level up or to the
D-307082 PowerMaster 360 User's Guide
repeatedly
once which
Advertisement
Table of Contents
