Visonic rMaster-360 User Manual page 17

C. User settings options menu
Click until the display reads the desired setting option and then press
SET ZONE BYPASS
REVIEW BYPASS
RECALL BYPASS
USER CODES
DURESS CODE
PROXIMITY TAGS
KEYFOBS
TIME & FORMAT
DATE & FORMAT
AUTO-ARM ENABLE
AUTO-ARM TIME
PRIVATE REPORT
SQUAWK
SCHEDULER
VOLUME CONTROL
SERIAL NUMBER
PLNK curr.params
<OK> TO EXIT
Returns to first option
D-307082 PowerMaster 360 User's Guide
Use to bypass a faulty (exclude) or unsecured ("disturbed") zones, or to clear a
bypassed zone. For further details and programming procedure see section B.1.
Use to quickly review the bypass scheme that is to see which zones are bypassed.
For further details and reviewing procedure see section B.2.
Use to recall the last used bypassed scheme for reuse in next arming period. For
further details and recalling procedure see section B.3.
Use to program the master user secret access code and the remaining seven other
user codes. For further details and programming procedure see section B.4.
Use to program the duress code. For further details and programming procedure
see section B.5.
Use to add new Proximity Tags to or to delete Proximity Tags when lost. For further
details and programming procedure see section B.6.
Use to add new keyfob transmitters or to delete a keyfob transmitter if for example
the keyfob is lost. For further details and programming procedure see section B.7.
Use to set the time clock to show the correct time and time format. For further
details and programming procedure see section B.8.
Use to set the calendar date to show the correct date and date format. For further
details and programming procedure see section B.9.
Use to enable or disable the option daily arming at predefined times (see Auto-Arm
Time setting). For further details and programming procedure see section B.10.
Use to set the predetermined time for the automatic daily arming if enabled (see
Auto-Arm Enable setting). For further details and programming procedure see
section B.11.
Use to program the four private telephone numbers for reporting alarm and other
event messages to private subscribers. For further details and programming
procedure see section B.12.
Use to enable or disable the squawk sound that is arm / disarm feedback
indication. For further details and programming procedure see section B.13.
Use to set the daily / weekly time schedule for start and stop activation of devices
connected to the PGM outputs. For further details and programming procedure see
section B.14.
Use to adjust the volume level of the various system beeps, and chime signal. For
further details and programming procedure see section B.15.
Use to read the system serial number and similar data see section B.16.
Use to read the current IP address of the PowerLink and similar data see section
B.17.
Use to exit from the "USER SETTINGS" menu back to Main Menu. For further
details see section A.2.
MENUS AND FUNCTIONS
.
3
3
3
17