Table of Contents
Advertisement
programming (see section A.3).
B.17 PowerLink parameters
The PLNK curr.params menu shows the current IP address, subnet mask, default gateway, and current mode of
communication. The PowerLink information is for support purposes only.
Here you can
read the current IP address of the PowerLink and other relevant data
Carefully read the section titled "Additional Information" according to the indicated references
table at end of this section.
1.
PLNK curr.params
2.
Curr.IP address
xxx.xxx.xxx.xxx
3.
Curr.subnet mask
xxx.xxx.xxx.xxx
4.
Current Gateway
xxx.xxx.xxx.xxx
5.
Current path
☺
Return to step 2
1
For detailed instructions on how to select the Setting Options – refer to sections A.1 and A.2.
2
To end this session and return to previous menu options, press the
3
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
*
If the Broadband Module is not registered to the PowerMaster, this menu will not be displayed.
D-307082 PowerMaster 360 User's Guide
*
Enter the [USER SETTINGS] menu, select the [
curr.params
] option and press
Displays the current PowerLink IP address.
Displays the current PowerLink subnet mask.
Displays the current PowerLink default gateway.
Displays the current PowerLink mode of communication.
Press the
button repeatedly until the display shows the required
mode and press
Cellular; None.
2, 3
Additional Information (section B.15)
MENUS AND FUNCTIONS
.
.
1
. Select from one of the following options: LAN;
button.
1
etc. – see
PLNK
41
Advertisement
Table of Contents
