Create Pin Codes; Register An Rfid Tag - Tele Radio TIGER G2 Installation Instructions Manual

CREATE PIN CODES

NOTE! You can store up to 10 PIN codes in the transmitter.
NOTE! '0000' is not a valid PIN code.
1. Make sure that the stop button is pressed.
2. Twist and pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Go to [PIN] --> [Enter PIN].
7. Select what position in the list that you want to store the new PIN code in by pressing the left start
button.
8. Enter the new PIN code (4 digits) by pressing the buttons 1-4:
Press...
Button 1
Button 2
Button 3
Button 4
9. Confirm by pressing the left start button.

REGISTER AN RFID TAG

NOTE! You can register up to 8 Tele Radio RFID tags in the transmitter.
NOTE! If you register an RFID tag that has already been registered, the RFID tag will be erased from the
previous position and stored in a new position.
NOTE! You can register an RFID tag by overwriting another RFID tag.
1. Make sure that the stop button is pressed.
2. Twist and pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
to...
Step up
Step down
Step right
Step left
- 45 -