Tg-Rx-Mnlcan, Tg-Rx-Mnrcan, Tg-Rx-Mnpcan, Tg-Rx-Mnlj1939, Tg-Rx- Mnrj1939, Tg-Rx-Mnpj1939 Base Board Receiver With Can Expansion Board - Tele Radio TIGER G2 Installation Instructions Manual

TG-RX-MNLCAN, TG-RX-MNRCAN, TG-RX-MNPCAN, TG-RX-
MNLJ1939, TG-RX-MNRJ1939, TG-RX-MNPJ1939 BASE BOARD
RECEIVER WITH CAN EXPANSION BOARD
WARNING! The receiver must NOT be opened by any other than a qualified installer. Make sure to
turn the electricity off before opening the receiver.
WARNING! Tele Radio remote controls are often built into wider applications. We recommend that
the system is provided with a wired emergency stop where necessary.
Base board:
1. LED representing stop relays 1 + 2 (red)
2. Stop relays 1 + 2
3. Obligatory fuse 2A (slow)
4. Terminal block for input power
5. Function relays 1–7
6. Relay LEDs 1–7 (red)
7. Function LEDs 5–7 (5 = red, 6 = yellow, 7 =
green)
8. Antenna connector
9. Function LEDs 1–4 (1 = red, 2 = yellow, 3 =
green, 4 = orange)
10. Function button (Cancel)
11. Terminal block for mixed I/O
12. Select button (OK)
13. Programming connector
14. Power LED (yellow)
- 31 -