Tg-Rx-Mxl12, Tg-Rx-Mxr12 Base Board Receiver - Tele Radio TG-T9-1 Installation Instructions Manual

TG-RX-MXL12, TG-RX-MXR12 BASE BOARD RECEIVER
WARNING! The receiver must NOT be opened by any other than a qualified installer. Make sure to
turn the electricity off before opening the receiver.
WARNING! Tele Radio remote controls are often built into wider applications. We recommend that
the system is provided with a wired emergency stop where necessary.
Base board- no display board mounted:
1. Rectifier bridge connector
2. Function LED 2 (red)
3. Function LED 3 (yellow)
4. Radio module
5. Function LED 1 (green)
6. USB programming connector
7. Antenna connectors
8. Terminal block for RS232/ RS485
9. Terminal block for digital I/O
10. Function relays 1-12
11. Stop relays 1-2
12. Safe function relays 1-2
13. Terminal block for input power
14. Obligatory fuse: Ceramic 3.15A(T)
15. Optional fuse
- 9 -