Receiver; Place Antenna And Receiver; Code Learning - Tele Radio T60 Installation Instruction

THE RECEIVER

PLACE ANTENNA AND RECEIVER

Place the receiver:
• As well protected from wind and water as possible.
• With the cable glands facing down to prevent water from seeping in.
Place the antenna:
• Place the antenna high above the ground.
• Avoid placing close to metal objects, such as electrical cables and
other antennas.
•
X= 3, 5 or 10 m. antenna cable
•
DIP-433K3
CODE-LEARNING
Transmitters and receivers must be co-programmed prior to use. Two
types of codes can be used with this transmitter:
Adjustable code:
The transmitter has a code switch with 10 three-position switches. There
are 59.049 codes available.
Fixed individual code:
The transmitter has a fixed, individual code, that cannot be changed.
10
1/4-433Kx
5/8-433Kx