Brother PR670E Operation Manual page 166

■ Repeating one element of a repeated
pattern
By using the Cut function, you can select one
element of a repeated pattern and repeat only that
single element. This function allows you to design
complex repeated patterns.
a Choose the direction in which the repeated
pattern will be cut.
• Touch to cut horizontally.
• Touch to cut vertically.
 The pattern direction indicator will change
depending on the direction selected.
b Use and
 The cut line will move.
164
to select the cut line.
c Touch .
 The repeated pattern will be divided into separate
elements.
d Touch .
e Use and to select the element to
repeat.
f Repeat the selected element.