Chapter4 Embroidering Settings; Basting Embroidery - Brother PR670E Operation Manual

4
Chapter
This chapter contains descriptions on the various embroidering settings, which make operation easier.

Basting Embroidery

Before embroidering, basting stitches can be sewn
along the outline of the pattern. This is useful for
embroidering fabric that cannot have stabilizer
material affixed with an iron or adhesive. By
stitching stabilizer material to the fabric, shrinkage
of the stitching or misaligned pattern can be
minimized.
Note
• It is recommended to finish combining and
editing the pattern before selecting the
basting setting. If the pattern is edited after
selecting the basting setting, the basting
and pattern may become misaligned, and
the basting under the pattern may be
difficult to remove after embroidering is
complete.
a Touch
settings screen.
b Use and
the pattern to the basting stitching.
Memo
• The higher the setting, the farther the
basting is from the pattern.
• The setting remains selected even if the
machine is turned off.
EMBROIDERING SETTINGS
, and then display page 2 of the
to specify the distance from
c Touch to return to the embroidering
settings screen.
d Touch to select the basting setting.
Note
• When is pressed, the pattern is moved
to the center. After selecting the basting
setting, move the pattern to the desired
position.
• To cancel the setting, touch
 Basting is added to the beginning of the sewing
order.
e Touch to continue to the
embroidering screen.
f Touch , and then press the start/stop
button to begin embroidering.
g When embroidering is finished, remove the
basting stitching.
1 Basting stitching
.
105