Brother PR670E Operation Manual page 227

was touched in the
embroidering screen.
Touch to return to the
embroidering settings screen. The
previous embroidery in the
embroidering screen will be canceled.
The machine was turned off while
sewing, then turned on again.
Touch to return the machine to
the condition (pattern position and
number of stitches) when it was turned
off. Follow the procedure described in
"Resume Embroidering After Turning
Off the Machine" on page 101 to align
the needle position and sew the
remainder of the pattern.
The thread picker did not operate
correctly.
Remove the thread entangled on the
thread picker.
The selected pattern is going to be
deleted because was touched.
was touched while thread
colors were being changed.
The thread trimming button was
pressed while a screen other than the
embroidering screen or embroidering
settings screen was displayed.
Display either the embroidering screen
or embroidering settings screen before
using the thread trimming function.
APPENDIX
The image is going to be deleted.
A saved combined pattern is being
rotated in the embroidering settings
screen.
Color sorting for the combined border
pattern will be canceled when
is touched. In addition, the thread marks
will be removed even if they have been
set.
Thread guide assembly support is not
prepared.
Prepare the thread guide assembly.
(Refer to page 26.)
7
225