Upper Thread Recommendations; Fabric Recommendations; Display Recommendations - Brother PR670E Operation Manual

Upper thread recommendations

Be sure to observe the following recommendations
concerning the upper thread.
Note
• It is recommended that rayon or polyester
embroidery thread be used (120 den x 2 /
135 dtex x 2 / 40 weight (in Americas and
Europe) / #50 (in Japan)).

Fabric recommendations

Be sure to observe the following recommendations
concerning the fabric.
Note
• Your machine can embroider fabric that is
up to 2 mm (5/64 inch) thick. If thicker fabric
is sewn, the needle may bend or break.
• When embroidering overlapping stitches, it
is difficult for the needle to penetrate the
fabric, possibly resulting in the needle
bending or breaking.
• Attach stabilizers to thin or stretch fabrics.
(Refer to "Attaching Iron-On Stabilizer
(Backing) to Fabric" on page 84 for
information.)
• When embroidering large pieces of fabric,
make sure that the fabric is not caught in
the carriage.

Display recommendations

Be sure to observe the following recommendations
concerning the use of the operation panel display.
Note
• Only touch the display with your finger or
included touch pen. Do not use a
mechanical pencil, screwdriver or any other
hard or sharp object. In addition, do not
apply extreme pressure to the display
screen, otherwise damage to the display
screen may result.
EMBROIDERING TUTORIAL
2
31