Chapter2 Embroidering Tutorial; Operating Precautions; Power Supply Precautions - Brother PR670E Operation Manual

2
Chapter
This chapter describes the basic embroidering operations in order—from turning on the machine and
sewing a pattern to finishing sewing. Follow the steps of the tutorial to embroider a pattern and master the
operation of this embroidery machine.

Operating Precautions

The necessary points to ensure the correct
operation of this machine are described below.

Power supply precautions

Be sure to observe the following precautions
concerning the power supply.
WARNING
• Use only regular household electricity for the
power source. Using other power sources may
result in fire, electric shock, or damage to the
machine.
• Make sure that the plugs on the power supply
cord are firmly inserted into the electrical
outlet and the power supply cord receptacle
on the machine. Otherwise, a fire or electrical
shock may result.
• Do not insert the plug on the power supply
cord into an electrical outlet that is in poor
condition.
• If any of the following occur, turn off the
embroidery machine and unplug the power
supply cord, otherwise a fire, an electric shock
or damage to the machine may result.
• When you are away from the machine.
• After using the machine.
• If a power outage occurs while the machine
is being operated.
• If the machine is not operating properly, for
example, when there is a loose or cut
connection.
• During electrical storms.
EMBROIDERING TUTORIAL
CAUTION
• Use only the power supply cord included with
this machine.
• Do not plug this machine in with extension
cords or multi-plug adapters with any other
appliances plugged into them, otherwise a fire
or an electric shock may result.
• Do not plug in or unplug the power supply
cord with wet hands, otherwise an electric
shock may result.
• When unplugging the power supply cord, be
sure to first turn off the machine, and then
grasp the plug when unplugging the cord.
Pulling on the cord may damage it or result in
a fire or an electric shock.
• Do not allow the power supply cord to be cut,
damaged, modified, forcefully bent, pulled,
twisted, or bundled. In addition, do not place
heavy objects on the cord or expose it to heat,
otherwise damage to the cord, fire or an
electric shock may result. If the power supply
cord or its plug is damaged, stop using the
machine, and then take the machine to your
authorized Brother dealer for repairs before
continuing use.
• If the machine is not to be used for a long
period of time, unplug the power supply cord,
otherwise a fire may result.
• When leaving the machine unattended, either
the main switch of the machine should be
turned to OFF or the plug must be removed
from the socket-outlet.
• When servicing the machine or when
removing covers, the machine must be
unplugged.
• For U.S.A only
This appliance has a polarized plug (one blade
wider than the other). To reduce the risk of
electrical shock, this plug is intended to fit in a
polarized outlet only one way.
If the plug does not fit fully in the electrical
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper electrical outlet. Do not modify the
plug in any way.
29