Repeatedly Sewing A Pattern Along A Diagonal - Brother PR670E Operation Manual

Repeatedly sewing a pattern
along a diagonal
Example
a Specify the upper-left corner as the starting
position and the lower-right corner as the
ending position.
Touch in the embroidering settings screen to
display the starting/ending position settings screen.
For the starting position, touch
to .
For the ending position, touch
to .
Touch to close the starting/ending position
settings screen.
114
b
c
d
so that it changes
so that it changes
Sew the first embroidery pattern.
Touch to display the embroidering screen, and
then touch and press the start/stop button.
1 Starting position
2 Ending position
After embroidering is finished, the machine
stops at the lower-right corner of the
pattern.
Touch and repeat steps
three times.
Note
• If the next embroidery pattern of the series
will be stitched outside the embroidery field,
the following screen will appear.
Rehoop the fabric to continue to repeat the
sewing pattern. Touch
b c
steps and .
Memo
• If the starting position and ending position
settings are changed, instead of sewing the
patterns in a fixed direction, various pattern
designs are possible.
b c
and
and repeat