Brother PR670E Operation Manual page 196

c Embroider over the appliqué fabric using
the same frame pattern.
• Be sure to stop the machine before the cross at the
center is sewn.
d Remove the embroidery frame from the
machine, and then cut off the excess
appliqué fabric along the outside of the
stitching.
Note
• Leave the fabric in the embroidery frame
when cutting off the excess appliqué fabric.
In addition, do not apply extreme pressure
to the framed fabric, otherwise the fabric
could become loose.
e Select the satin-stitched frame pattern with
the same shape.
Note
• If the size or sewing position of the straight-
stitched frame pattern is changed, be sure
to change the size or sewing position of the
satin-stitched frame pattern in the same
way.
194
f Attach the embroidery frame removed in
d
step , and then finish embroidering the
appliqué.