Selecting/Managing Thread Colors For Each Needle Bar (Manual Color Sequence); Convenience Of The Manual Color Sequence - Brother PR670E Operation Manual

n Sew the outline "APPLIQUE".
1 Outline of appliqué piece
o After embroidering is finished, remove the
stabilizer material from the embroidery
frame.
p Use scissors to cut the excess water-soluble
stabilizer from outside the appliqué outline.
q Soak the appliqué piece in water to dissolve
the water-soluble stabilizer.
r Dry the appliqué piece, and then iron it if
necessary.
Note
• Do not apply a strong force when ironing,
otherwise the stitching may be damaged.
Memo
• The outline is sewn using satin stitching.
• Some glue may get onto the presser foot,
needle, and needle plate at this time. Finish
embroidering the appliqué pattern, and then
clean off the glue.
108
Selecting/Managing
Thread Colors for Each
Needle Bar (Manual
Color Sequence)
The thread colors assigned to each needle bar can
be manually specified/managed. In addition, the
thread colors can be assigned to needle bars
automatically and more efficiently than when the
settings are normally specified.
Convenience of the manual color
sequence
The manual color sequence is convenient when
the machine is being used under the following
conditions.
■ When using embroidery data that
has no thread color information,
such as with DST files
The thread spools to be used can easily be selected
for data with no thread color information. (For
details on the thread color information for DST files,
refer to "Colors of Tajima (.dst) embroidery data" on
page 200.)
■ When the same combination of
thread colors is always used
If specific thread colors are assigned to certain
needle bars, the thread color settings can be
changed with the needle bar number assignments,
even when the pattern is changed. The operation is
simplified if the same thread colors are always used.
■ When continuously sewing with the
same needle bar settings
If the settings are specified normally, the needle bar
settings are canceled when the embroidering
settings screen appears after sewing stops. However,
with the manual color sequence, the needle bar
settings continue to be applied unless the pattern is
deleted or the machine is turned off.
This is useful if the same pattern is to be sewn
continuously multiple times.