Embroidering From The Beginning Or Middle Of The Pattern - Brother PR670E Operation Manual

■ If the bobbin thread ran out, replace
the bobbin at this point in the
procedure.
a Replace the bobbin with a bobbin wound
with bobbin thread. (Refer to page 33.)
• If the hook cover can be opened, replace the bobbin
without removing the embroidery frame from the
machine.
• If the machine bed is hidden, for example, with a bag-
shaped piece of fabric, or if the hook cover cannot be
opened, temporarily remove the embroidery frame.
(Refer to page 60.) After replacing the bobbin, re-
attach the embroidery frame. (Refer to page 45.)
Note
If the embroidery frame is removed before
embroidering of the pattern is finished, take
caution, otherwise the pattern may become
misaligned.
• Do not apply extreme pressure to the
framed fabric and cause it to become loose.
• When removing and re-attaching the
embroidery frame, do not allow the frame to
hit the carriage or the presser foot.
If the carriage is hit and moves, turn the
machine off, then on again. The correct
frame position at the time that the machine
was stopped is stored in the machine's
memory, and the embroidery frame is
returned to the correct position.
• When the embroidery frame is re-attached,
make sure that the pins on the left and right
arms of the embroidery frame holder
securely fit into the holes in the handles on
the embroidery frame.
b Go back through the stitching in the same
way as that described in step
upper thread breaks" on page 97, and then
continue embroidering.
Embroidering From the
Beginning or Middle of
the Pattern
If you wish to restart embroidering from the
beginning, for example, if trial embroidery was
sewn and an incorrect thread tension was used or
if the wrong thread color was used, restart the
embroidering using the forward/backward stitch
key. In addition, you can go forward or back
through the stitching by thread color or by stitch to
start stitching at any position of the pattern.
a
• If necessary, trim and remove the sewn stitches.
b
b
of "If the
 The stitch navigating screen appears.
OTHER BASIC PROCEDURES
Note
• Be careful when going back or forward
through the stitching since the embroidery
frame moves at the same time.
Press the start/stop button to stop the
machine.
Touch .
3
99