Using The Embroidery Sheet; Large/Small Pieces Of Fabric - Brother PR670E Operation Manual

Using the embroidery sheet

In order to hoop the fabric so that the pattern will
be sewn in the correct position, use the guidelines
on the embroidery sheet to accurately stretch the
fabric in the frame.
a With a fabric marker, mark the area of the
fabric you want to embroider.
b Place the embroidery sheet on the inner
frame. Align the guidelines on the
embroidery sheet with the marks that you
drew on the fabric.
1 Guidelines
2 Inner frame
c Gently stretch the fabric, so that there are
no folds or wrinkles.
86
d Press the inner frame into the outer frame.
Remove the embroidery sheet.

Large/small pieces of fabric

This section provides information on embroidering
fabric that is either much larger or much smaller
than the embroidery frame.
■ Embroidering large pieces of fabric
or heavy clothing
When embroidering large pieces of fabric or heavy
pieces of clothing, use a clothespin or binder clip to
fasten the excess fabric to the embroidery frame so
that it does not hang down from the frame.
Embroidering with excess fabric hanging down from
the embroidery frame may prevent the frame from
moving properly and may result in a misaligned
pattern.
• Use a clothespin or binder clip to fasten the excess
fabric to the embroidery frame.