Brother PR670E Operation Manual page 181

■ Page 5
I Link function
Set the Link function on or off. (Refer to page 142)
J Manual Color Sequence
Set the "Manual Color Sequence" on or off. (Refer
to page 108)
K Thread Sensor
Set "Thread Sensor" to either "ON" or "OFF".
If thread sensor is set to "OFF", the machine does
not stop until embroidering is finished, even if the
thread breaks or there is no more thread in the
bobbin. Set thread sensor to "ON", except when it
is necessary to set it to "OFF".
When the machine is purchased, "ON" is selected.
Note
• Normally, set thread sensor to "ON".
When thread sensor is set to "OFF", the
machine will not be able to detect if the
upper thread has become tangled.
Continuing to use the machine with tangled
thread may cause damage.
L Mouse Pointer
The shape can be selected for the pointer that
appears when a USB mouse is connected.
Depending upon the background color, select the
desired shape from the three that are available.
When the embroidery machine is purchased,
is selected.
* The setting remains selected even if the machine
is turned off.
M Units of Measure
The units of measurements can be set to
millimeters or inches.
When the embroidery machine is purchased,
"mm" is selected.
N Brightness of the Screen Display
The brightness of the screen display can be
adjusted.
The screen will appear dimmer if the number on
the settings screen decreases. The screen will
appear brighter as the number increases.
When the embroidery machine is purchased, "4" is
selected.
O LANGUAGES
The language setting can be specified.
■ Page 6
I
J
K
L
M
N
O
P The Total Count counter shows the total number
Q The Total Time counter shows the total amount of
* Use counters P and Q as a standard for
R The "No. ##" is the number for the embroidery
S Version
• Check with your local authorized Brother
Details of each of the settings are described in the
following sections. After specifying the desired
settings, touch
was displayed before the settings screen was
displayed.
• Some settings cannot be changed while
BASIC SETTINGS AND HELP FEATURE
of stitches sewn, and the Trip Count counter show
the number of stitches that have been sewn since
the machine's last maintenance.
time that the machine has been used, and the Trip
Time counter shows the amount of time that the
machine has been used since its last
maintenance.
performing periodic maintenance and for receiving
maintenance for the machine.
machine.
Shows the version of the software installed on this
embroidery machine. (Refer to page 231.)
Note
dealer or at " http://s.brother/cpbac " for
details on available updates.
to return to the screen that
Note
sewing.
P
Q
R
S
6
179