Chapter6 Basic Settings And Help Feature; Using The Settings Key; Understanding The Settings Screen - Brother PR670E Operation Manual

6
Chapter
This chapter contains descriptions on the use of the settings key and the machine operations guide key,
introduced on page 36. Details on changing the basic embroidery machine settings and viewing
operations on the LCD will be provided.

Using the Settings Key

Touch (settings key) to change many of the
basic embroidery machine settings.

Understanding the settings screen

There are six pages in the settings screen. Touch
and in the lower-center of the screen until
the desired page is displayed. The
appears on all pages.
■ Page 1
1
2
1 An image of the current settings screen can be
saved on USB media.
2 The settings on the page containing this key will be
reverted to their defaults.
3 The guides (centerpoint marker and grid) for the
pattern display area can be specified. (Refer to
page 180.)
4 Changing the thread color display
The color information in the thread color sequence
display and the needle bar thread information can
be switched to the color name, the thread brand
and color number or the sewing time. (Refer to
page 182.)
5 PES Thread Code
You can display the thread color for "PES" format
data according to the machine setting, or setting
from the embroidery editing software. (Refer to
page 183.)
6 Embroidery Background Color/Thumbnail
Background Color
Depending on the color of the embroidery,
changing the background color of the pattern
display area and thumbnails may make them more
visible and easier to select. (Refer to page 183.)
BASIC SETTINGS AND HELP FEATURE
key
3
4
5
6
■ Page 2
7 "DST" Setting
Specifies whether or not jumpstitches are cut. In
addition, when using Tajima embroidery data (.dst),
you can specify whether or not the thread is cut
according to the specified number of jump codes.
(Refer to page 184.)
8 Short Stitch Delete
Specifies the length of short stitches that are to be
deleted. (Refer to page 184.)
9 Thread Tail
Specifies the length of upper thread that remains
threaded through the needle after the thread is
trimmed (length of thread passed through the eye
of the needle). (Refer to page 185.)
0 Basting Distance
Specify the distance between the pattern and the
basting stitching.
It can be set to 0.0 mm to 12.0 mm.
When the embroidery machine is purchased, "5.0
mm" is selected. Refer to "Basting Embroidery" on
page 105 when using this setting.
A Acceleration
Specifies the acceleration from the initial speed
(when sewing begins) until the maximum sewing
speed is reached.
Note
• If the settings for ""DST" Setting" 7 or
"Short Stitch Delete" 8 are changed from
the previous setting, the new settings are
only applied to the next embroidery.
7
8
9
0
A
177