Brother PR670E Operation Manual page 60

• While the embroidery machine is sewing, the point
being sewn is indicated by the green crosshairs in the
pattern display area. In addition, the number of
stitches and the time count up.
c After sewing of the first color is finished,
the machine automatically stops and trims
the thread. The needle bar case moves to
the 2nd color position and sewing of the
2nd color begins.
 The thread color display in the screen continues to
the second color, and the thread information for the
second needle bar is surrounded by the blue frame.
d This continues until the last color is sewn,
and the embroidery machine automatically
stops.
 The embroidering settings screen reappears.
 The start/stop button lights up in red.
• No thread trimming operations at the beginning of
stitching and at the end of stitching are necessary.
58
■ Continuing embroidering
To sew the same pattern again, touch
 The embroidering screen appears so the same
pattern can be sewn again.
To select a new pattern, touch
 The pattern type selection screen appears.
Memo
• Automatic Lock stitching can be set so that
it is sewn at the beginning of the
embroidery, when starting to sew after
changing thread colors, and when trimming
the thread. (Refer to "Automatic Lock Stitch
Setting" on page 112.)
• The sewing speed can be changed, even
while the pattern is being sewn. (Refer to
"Maximum Sewing Speed Setting" on
page 116.)
.
.