Removing The Fabric; Turning Off The Machine - Brother PR670E Operation Manual

b Pull off the embroidery frame toward you.

Removing the fabric

a Loosen the outer frame screw.
 If the screw was tightened using a disc-shaped
screwdriver, use the included disc-shaped
screwdriver to loosen it.
b Remove the outer frame, and then remove
the fabric.
EMBROIDERING TUTORIAL
13. Turning OFF the
Machine
After all embroidery is finished, turn off the
machine.
a Set the main power switch to "
 The embroidery machine is turned off and the
display and the start/stop button indicator goes off.
b Unplug the power supply cord from the
electrical outlet.
Grasp the plug when unplugging the power supply
cord.
c If necessary, unplug the power supply cord
from the machine.
Store the power supply cord in a safe place.
Note
• If a power outage occurs while the
embroidery machine is being operated, turn
off the embroidery machine and unplug the
power supply cord. When restarting the
embroidery machine, follow the necessary
procedure to correctly operate the machine.
(Refer to "2. Turning ON the Machine" on
page 35.)
2

".
61