Setting Up The Machine - Brother PR670E Operation Manual

More than 512 mm
250 mm (20-5/32
(9-1/32 inches) inches)
CAUTION
• In order to prevent malfunctions or damage,
do not set up the machine in a location
exposed to the following conditions.
• Insufficient space
• Liquids, such as water (1)
• Direct sunlight (2)
• Objects within the moving range of the
embroidery frame (3)
• Extremely high or extremely low
temperatures. The operating environment
should be between 5 °C (40 °F) and 40 °C
(104 °F). (4)
• Extreme dust (5)
• Blocked ventilation slots (6)
• An unstable surface (7)
• Connection to extension cords or multiple
adapters (8)
1
2
3
4
Note
• For your safety: Since the machine weighs
approximately 38 kg (84 lb), do not set it up
on an unstable table or desk.
24
Minimum of
50 mm
(2 inches)
587 mm
(23 inches)
More than
350 mm
(13-3/4 inches)
More than
250 mm
(9-1/32 inches)
5
6
7
8

Setting up the machine

When setting up the machine, adjust the legs so
that the machine is steady.
a Make sure that all packing tape affixed to
the machine is peeled off and that all
packing material is removed.
b Set up the machine while making sure that
there is sufficient space around it.
More than 512 mm
250 mm (20-5/32
(9-1/32 inches) inches)
c Adjust the legs so that the machine is
steady.
Use the included wrench to loosen the lock nut on the
leg that you wish to adjust.
1 Lock nut
2 Adjustable foot nut
 The foot can be turned.
Minimum of
50 mm
(2 inches)
587 mm
(23 inches)
More than
350 mm
(13-3/4 inches)
More than
250 mm
(9-1/32 inches)