Embroidery Frame Position And Movement - Brother PR670E Operation Manual

Embroidery Frame
Position and Movement
The following provides information concerning
the embroidery frame when operating the
embroidery machine.
■ Embroidery frames that cannot be
used for embroidering
As explained on page 42, the embroidery frame
indicators at the top of the screen show the
embroidery frames that can be used to sew the
currently selected pattern.
Embroidery frames with an embroidering area
smaller than the pattern cannot be used. In addition,
the embroidery frame cannot be used if the
embroidery is smaller than the embroidering area
but is positioned so that it extends out of the
embroidering area of the frame.
Embroidery frames with an embroidering area
smaller than the pattern
Patterns that extend out of the embroidering area
of the frame
In either of these cases, a message appears on the
embroidery machine, warning that the embroidery
frame must be changed.
88
A message indicating that the embroidery frame be
replaced may appear even if no embroidery frame is
installed.
The embroidery machine detects which embroidery
frame is installed according to the position of the left
arm of the embroidery frame holder. Therefore, the
embroidery frame size is determined by the position
of the left arm, even if the embroidery frame is not
actually installed. In addition, if the embroidery
frame holder is not installed, the embroidery
machine determines that the cap frame (optional) is
installed.