Table of Contents
Advertisement
Saving embroidery patterns in
the machine's memory
You can save embroidery patterns that you have
customized and will use often; for example, your
name, patterns that have been rotated or had the
size changed, patterns that have had the
embroidering position changed, etc. A total of
about 10 MB of patterns can be saved in the
machine's memory.
Note
• Do not turn the main power to OFF while the
"Saving..." screen is displayed. You will
lose the pattern you are saving.
Memo
• It takes a few seconds to save a pattern to
the machine's memory.
• See page 137 for information on retrieving a
saved pattern.
a
Touch
when the pattern you want to
save is in the embroidering settings screen.
b
Touch
.
*
Touch
to return to the original screen without
saving.
The "Saving..." screen is displayed. When the
pattern is saved, the display returns to the original
screen automatically.
SELECTING/EDITING/SAVING PATTERNS
■ If the memory is full
If the screen below displays, either the maximum
number of patterns have been saved or the pattern
you want to save takes a lot of memory, and the
machine cannot save it. Press
previously saved pattern, then you can save the
current pattern. Refer to "Retrieving patterns from
the machine's memory" on page 137.
Saving embroidery patterns to
USB media/SD card
When sending embroidery patterns from the
machine to USB media/SD card, plug the USB
media/SD card into the machine's USB port/SD
card slot.
Memo
• USB media is commercially available, but
some USB media may not be usable with
this machine. Please visit our website
( http://s.brother/cpbac ) for more details.
• Depending on the type of USB media being
used, either directly plug the USB device
into the machine's USB port or plug the
USB media Reader/Writer into the
machine's USB port.
• The USB media/SD card can be inserted or
removed at any time.
a
Touch
when the pattern you want to
save is displayed in the embroidery settings
screen.
and delete a
5
135
Advertisement
Table of Contents
Troubleshooting
