Table of Contents
Advertisement
Operating instructions
4.1.3 Filling and heating the machine
You can see what the machine is doing on the machine's panel.
•
Close the doors.
•
Press button (10) to switch on the power supply.
•
Press the button (2 or 4). The filling and heating process will begin.
•
When the machine is filled and heated, the chemical pump starts it and
runs for a while to mix the detergent.
•
When the detergent is mixed, the message on the display indicates that the
feed should start. Start the feed by pressing the button (5).
•
The machine is now ready to wash.
N.B.! The time it takes for the machine to fill and heat up to the right washing tem-
perature varies between 5 and 30 minutes and depends on the temperature of the
incoming water.
WD-11
27
Rev. 5.0 (202206)
Advertisement
Table of Contents
