Operating instructions
This is what you should do to set the start time and which days of the week it
should apply to:
Set the start time. The value that is currently set flashes.
•
Change the flashing value with the buttons
▲ and ▼.
•
Move between the settings for the part of
the day (AM / PM), hours and minutes with
the button ►.
•
Once the setting of all the values for the
start time are complete - press SET.
Set the pulse length.
•
The pulse length should always be set to
1 second. Change the value if necessary
with the buttons ▲ and ▼.
•
Press SET when the setting is complete.
Press SET once more.
Hold down the MODE button for 3 seconds in order to return to normal display information.
WD-11
P
The arrow symbol and adjustable value flash-
es
P
32
Rev. 5.0 (202206)
STEP
PULSE
90-9-05-010
STEP
PULSE
90-9-05-011