Table of Contents
Advertisement
Operating instructions
Setting the start time, days of the week
With this setting, you can set a time when the dishwasher begins to fill and heat
the water in the tank, and which days of the week this start time applies to. If you
want the dishwasher to start at another (additional) time, you must set it for this
time too. All weekly settings are active at the same time. For example: The ma-
chine should start filling with water and heating at 8.00 on Monday to Friday inclu-
sive and at 8.45 on Saturday and Sunday. Therefore, it is set to 8.00 for Monday,
Tuesday, Wednesday, Thursday and Friday, and is set to 8.45 for Saturday and
Sunday.
This is what you should do to set the start time and which days of the week it
should apply to:
Access the start time settings mode by pressing the MODE button for 3 seconds.
•
Press the SET button.
If there are no previously stored start time settings, the points below must be followed. If start time settings
are stored, the timer moves on directly to the next step (set days of the week):
•
Press on either of the buttons ▲ or ▼ so
that the message ON/OFF changes to
PULSE.
•
Press the SET button.
Set which days of the week the start time should apply to.
•
To activate the day of the week that the
pointer (the thin line under the day of the
week) indicates, press either of the buttons
▲ or ▼. When a thicker line under the thin
flashing line is shown, this day is activated.
•
By pressing the button ►, the pointer can
be moved.
•
Continue to move and activate with the but-
tons until all the days of the week which the
start time should apply to have a thicker line
visible under them.
•
Once the setting is complete - press the
SET button.
WD-11
P
P down to the left flashes
P
The message ON/OFF flashes
P
The arrow symbol and the line under the day
of the week flashes
31
Rev. 5.0 (202206)
STEP
PULSE
90-9-05-008
STEP
90-9-05-026
STEP
PULSE
90-9-05-009
Advertisement
Table of Contents
