Table of Contents
Advertisement
Operating instructions
The display's appearance during operation (normal information)
When the machine is in operation, the timer's display looks different depending
on whether the start time is set or not. The display also depends on how the start
time has been set.
When the start time is not set, or when the start time is set for a specific date, the
display appears as above. The actual time (12-hour clock) is shown on the dis-
play. The present day of the week is shown as a thin line under the name of the
day of the week. (If start time for date is set and this date has expired, the mes-
sage YEAR is shown to the right of the time).
When the machine is set to start at a certain time on certain days of the week, the
display appears as above. The time and day of the week are shown here in the
same way as above. The next upcoming start time is shown too. The time for the
next start time appears under the actual time, and day of the week for the next
start time is indicated with a thicker line under the name of the day of the week.
In both cases, it is possible to see the current date by holding down the button ►
for 3 seconds. The date is then shown for 3 seconds on the display before return-
ing to its state as per the illustrations above.
WD-11
90-9-05-003
PULSE
90-9-05-004
29
Rev. 5.0 (202206)
Advertisement
Table of Contents
