Table of Contents
Advertisement
Operating instructions
Error messages
If a fault occurs on the machine, an alarm appears on the panel display. Some
alarm texts warn when something is wrong, whereas others just provide informa-
tion. Some alarms only occur if the machine has certain additional options, such
as e.g. an extra HACCP alarm.
Control panel
1.
2.
3.
4.
5.
Next to the panel button for alarm reset (3) is a LED (4) which illuminates red
when an alarm is activated. If the alarm can be reset with the reset button, the
LED flashes. If the activated alarm cannot be reset, the LED will be constantly lit.
Generally, if the actions proposed below do not solve the problem, or if the alarm
returns repeatedly in succession, you should contact the service company for
them to deal with the fault.
ALARM MESSAGE
(0)
PLATFORM ERROR
(63) POWER SUPPLY
FAILURE
CHECK THE
EMERGENCY SWITCH
1
2
3
4
panel
Display
Button for the feed
Pushbutton for resetting alarm
Red LED for indication of alarms. If the LED flashes, the alarm can be reset
by pressing button (3).
Emergency stop
ACTION
Restart the machine.
Reset the emergency stop by turning the knob in the direction of the arrows. Re-
start the machine.
WD-11
5
49
Rev. 5.0 (202206)
Advertisement
Table of Contents
