Table of Contents
Advertisement
Operating instructions
Changing the set start times, date:
Hold down the CHECK button for approx. 3 seconds.
•
Scroll forward to the start time set-
ting that should be changed by
pressing CHECK repeatedly.
•
Hold down the SET button for ap-
prox. 3 seconds.
•
Press the SET button.
•
Set start date, stop date, start time
and pulse length in the same way as
described under "Setting the start
time, date"
•
The display returns to check infor-
mation mode when the SET button is
pressed after the pulse length has
been changed.
•
You can choose here to scroll further
to the next set start time by pressing
the CHECK button or to exit the
check information mode by holding
down the MODE button for approx. 3
seconds (if the buttons have not
been pressed for at least 60 sec-
onds, the display returns automati-
cally to normal display mode).
WD-11
Edt flashes
START and adjustable value flash-
es
r02 flashes
37
Rev. 5.0 (202206)
PULSE
90-9-05-020
PULSE
P
90-9-05-023
PULSE
P
90-9-05-024
PULSE
90-9-05-025
Advertisement
Table of Contents
