Table of Contents
Advertisement
Operating instructions
ALARM MESSAGE
(101)
LOW TANK LEVEL
SUPPLEMENTARY
FILLING ONGOING
(41)
LOW LEVEL IN TANK 2
(CHEM WASH TANK 1)
(45)
LOW LEVEL IN
FINAL RINSE TANK
(46)
MOTOR PROTECTION
PUMPS ACTIVATED
CALL SERVICE
(50)
MOTOR PROTECTION
FANS ACTIVATED
CALL SERVICE
(51) OVERLOAD
FEEDING ACTIVATED
REMOVE OBJECT
RESTART FEEDING
(52) FEEDER LIMIT
SWITCH ACTIVATED.
REMOVE OBJECT FROM
THE FEEDER LIMIT
(61)
LOW TEMPERATURE
IN TANK 2
(CHEM WASH TANK 1)
(66)
LOW TEMPERATURE
IN THE FINAL RINSE
BOILER
(71) WASHING DETER-
GENT ALARM ACTIVE
CHECK DETERGENT
DEVICE
(77)
FINAL RINSE ERROR
SENSOR ERROR
FLOW METER BV02
(76)
FINAL RINSE ERROR
NO FLOW IN
THE MACHINE
(75)
FINAL RINSE ERROR
LOW FLOW IN
THE MACHINE
(80) STRAINER STOPPED
IN TANK 02. CLEAN
FILTER AND STRAINER
PRESS RESET
WD-11
ACTION
The water level in one of the tanks is low so the dishwasher has started to top
up the water. When the top up is complete, the machine can be operated in the
normal way.
Close the level pipe or the outlet seal. Check the rubber sleeve.
Close the outlet seal. Check the rubber sleeve.
Contact service personnel!
Contact service personnel!
Remove the item. Start feed.
Remove the basket. The feed will start automatically.
Reset the alarm. If the error recurs, contact an authorised service company.
Reset the alarm. If the error recurs, contact an authorised service company.
Check and fill with new detergent.
Reset the alarm. If the error recurs, contact an authorised service company.
Check that the stopcocks on the incoming water supply are open. Reset the
alarm. If the error recurs, contact an authorised service company.
Clean the nozzles. Reset the alarm. If the error recurs, contact an authorised
service company.
Clean the filters. Reset the alarm.
52
Rev. 5.0 (202206)
Advertisement
Table of Contents
