Table of Contents
Advertisement
Operating instructions
Setting the start time, date
It is possible to set the start time for specific dates, either for an individual date or
for a period between a start date and an end date. It is possible to set the timer
for a date up to two years from the current date.
This is what you should do to set the start time and which dates it should apply to:
Hold down the MODE button for 3 seconds in order to enter settings mode.
•
Press MODE again.
•
Press the SET button.
If there are no previously stored start time settings, the points below must be followed. If start time settings
are stored, the timer moves on directly to the next step (set start date):
•
Change with the buttons ▲ and ▼ so that
PULSE is indicated instead of ON/OFF.
•
Press SET.
Set the start date (adjustable value flashes):
•
Change the flashing value with the buttons
▲ and .
•
Scroll to the next value with the button ►.
•
When all the values (year, month and day)
are set, press SET.
WD-11
P
P down to the left flashes
P
The message YEAR and P down to the left
flashes
P
The message ON/OFF flashes
P
33
Rev. 5.0 (202206)
STEP
PULSE
90-9-05-008
STEP
90-9-05-012
STEP
90-9-05-013
PULSE
90-9-05-014
Advertisement
Table of Contents
