04/13 Rev. 5.08-02
Mounting the machine on a support
stand
WARNING!
Risk of injury from a tipping over support
stand.
When installing the machine on a support
stand, make sure that it can not tip over.
Fix the support stand onto the ground.
Mounting options
The ALX 73x can be mounted in two ways:
• At the machine rear side [13], see chapter
side mounting
on page 9.
• At one of the flanges at the machines outer side
[14], see chapter
Mounting at the machines outer
side
on page 11.
Recommended mounting points for the different op-
eration positions see chapter
positions
on page 2.
SERVICE MANUAL
ALX 73x
Rear
Admissible operation
Unpacking and assembling the machine
[13] Rear side mounting.
[14] Bottom mounting.
8