Mounting The Rotary Encoder - Novexx Solutions ALX 73 Series Service Manual

Hide thumbs Also See for ALX 73 Series:

Table of Contents

04/13 Rev. 5.07-00

Mounting the rotary encoder

Rotary encoder with

measuring wheel at the

conveyor belt

[80] Mounting the rotary encoder with measurement wheel at the

A measuring wheel translates the conveyor belt movement into rotation of the rotary

encoder shaft.

Diameter of the measuring wheel [80D] and resolution (impulses per rotation) of the

rotary encoder can be entered directly in the function menu.

Rotary encoder on the

drive axle of the con-

veyor belt

[81] Mounting the rotary encoder onto the driving axle of the

With this mounting option, the rotary encoder is mounted directly onto the drive axle

of the conveyor. In this case, the driving gear of the conveyor belt takes the part of the

measuring wheel. Accordingly, the diameter of the driving gear [81D] must be entered

into function (LMA)

Rotary encoder at the

motor axle

[82] Mounting the rotary encoder on the motor axle.

The rotary encoder is mounted onto the motor axle. The rotation speed of the motor

is normally transmitted via a reduction gear to the driving axle of the conveyor belt.

SERVICE MANUAL

conveyor belt. D = Diameter of the measurement wheel.

conveyor belt. D = Diameter of the driving gear.

MACHINE SETUP > Encoder

ALX 73x

Diameter.

Installing APSF

Table of Contents