04/13 Rev. 5.08-02
Mounting the holding plate
Tool
8 mm hex socket screwdriver
Mounting
Attach the dispensing edge holding plate [32A] with
4 screws to the frontal housing flange.
The 2 studs [32B] in the holding plate must rest on
the flange edge [32C].
Use the shipped screws (DIN EN ISO 4762 M10x20
A2).
SERVICE MANUAL
ALX 73x
C
B
[32] Mounting the dispensing edge holding plate (A).
Unpacking and assembling the machine
15
A