Machine Setup Menu - Novexx Solutions ALX 73 Series Operating Manual

P
RODUCT DESCRIPTION
Disabled: Dispensing counter counts forwards, i.e. each label that is dispensed in-
creases the counter state.
Label stop quan.
After dispensing this number of labels, the dispenser stops
This function only appears if
Setting range: [0...99999]; default: 0

MACHINE SETUP menu

Store prod.prof.
Save the current settings as a product profile
With the exception of functions
>
Parameters = "Without adj. par" (file "Setup.for").
Del. prod.profil
Deletion of a product profile from the internal database
Turn-on mode
Operating mode the machine is in after it is turned on
Settings: [Online, Offline, Standalone]
Language
Language used in the display
Settings: [German, English, French, Spanish, Dutch, Danish, Italian, Polish, Turkish]
Materialend err
Related to internal OD monitoring.
Disabling the function:

Re-enabling the function:

Defines the diameter threshold for the material roll. If the (calculated) material roll di-
ameter is below the threshold value, the following status message appears:
An additional material end error is caused, if no unwinder rotation is detected during
at least 600 mm of material feeding:
Operating manual ALX 73x | file version 02 | 03/2012
Label stop quan., all functions are saved as described under
•
Online: dispensing mode
•
Offline: setting mode
•
Standalone: operation in standalone mode. Required to load firmware or configu-
rations from CF card.
•
Settings: [Disabled, „Mat.diam < x mm"]
•
Setting range for x = [40...500]
•
Default setting: x= 60
Set x < 40.
Press the key.
Status num: 5071
Material end unw
Status num: 5072
Material end unw
LABEL SETUP > Stop count. mode
MACHINE SETUP >
Dispense counter and
ALX
73x
GB
= "Enabled"
LABEL SETUP
MACHINE SETUP >
Store
Dispenser parameter menu | 36