Defining The Operating Position; Space Requirement; Admissible Operation Positions - Novexx Solutions ALX 73 Series Service Manual

04/13 Rev. 5.08-01
Defining the operating
position

Space requirement

For machine dimensions read topic section
Data  > „Entire unit" > „Dimensions".
On the machine side facing the operator must be left at
least 1 m free space for loading and changing of sup-
plies.
On the connector-side of the machine and at the sides
must be left at lest 0.5 m free space due to:
• Optimal air exchange at the ventilation openings
[1A, B]
• Accessibility of the mains switch

Admissible operation positions

The ALX 73x may only be used for labelling from the fol-
lowing directions:
• Top labelling,
see chapter Top labelling 
• Side labelling,
see chapter Side labelling 
The machine should be fixed at a mounting point, which
is recommended for the applied configuration (see
(Tab. 1) and the following chapters).
Sign Meaning
1 Recommended
2 O.k.
3 Not recommended
(X) Mounting point on the rear side
[Tab. 1] Meaning of the signs used in the pictures.
For recommended fixtures read chapter
machine on a support stand 
SERVICE MANUAL
ALX 73x
Technical
on page 3
on page 5
Mounting the
on page 8.

Defining the operating position

[1] Ventilation openings (A, B) at ALX 73x.
A
B
2