Download Print this page

Machine Operating Safety - Novexx Solutions ALX 73 Series Service Manual

Hide thumbs Also See for ALX 73 Series:

Advertisement

04/13 Rev. 5.07-00
Pay attention to the information
Information must be
This service guide
made available
adjusting, or repairing the labeller.
Missing or damaged warning plates are to be replaced.

Machine operating safety

Installation, maintenance
Before starting up the machine:
SERVICE-HANDBUCH
WARNING!
Reliable and efficient operation of the labeller is only guaranteed if all necessary
information is observed!
Carry out the installation, connection, programming, setting, and repairing of the
machine exclusively in accordance with the specifications in this manual.
Observe additional safety and warning notices attached to the labeller.
Observe and adhere to all relevant ordinances and rules in their applicable form.
Examples:
• Work place regulation
• Accident prevention regulations
• Trade union regulations for occupational safety and health
• Equipment safety law
• Recycling and waste management law
must be made available to all persons who are entrusted with installing, setting up,
must be maintained in legible condition.
must be made available to the new owner if the machine is sold.
Safety and warning notices attached to the labeller must be kept clean and legible.
WARNING!
Improper usage of the machine can lead to accidents, material damage and loss of
production!
When installing the labeller, check for visible shipment damage. Immediately
inform Avery Dennison of any damage.
When installing the machine on a support stand, make sure that it can not tip
over.
Only put the machine into operation if it is in flawless condition.
Only perform alterations or conversions to the machine with the consent of Avery
Dennison's customer service.
Only use original replacement parts.
WARNING!
Danger of body part trapping and pinching at the dispensing edge due to products
moving in the conveyor direction!
Take appropriate measures to prevent personnel from reaching between a pro-
duct and the dispensing edge; e.g. install a protective guard or shield.
ALX 73x
8

Advertisement

loading

This manual is also suitable for:

Alx 734Alx 735Alx 736Alx 92 series