Novexx Solutions AP 4.4 User Manual

Hide thumbs Also See for AP 4.4:

Advertisement

Quick Links

11/08 Rev. 5.01-01
General Notice .............................................. 2
Safety ........................................................ 2
Troubleshooting ........................................ 2
Ordering Spare Parts ................................ 3
Note on Cleaning ...................................... 3
Cleaning Agents ........................................ 3
USER MANUAL
AP 4.4 - AP 5.4
Printhead .......................................................5
Cleaning the Printhead ..............................5
Changing the Printhead .............................7
Print Roller .....................................................8
Cleaning the Print Roller ............................8
Changing the Print Roller ...........................8
Punch Sensor ..............................................10
Index ............................................................11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AP 4.4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Novexx Solutions AP 4.4

  • Page 1: Table Of Contents

    11/08 Rev. 5.01-01 USER MANUAL AP 4.4 – AP 5.4 Maintenance and Cleaning General Notice ..........2 Printhead ............5 Maintenance by Qualified Personnel ..2 Cleaning the Printhead ......5 Safety ............2 Changing the Printhead ......7 Troubleshooting ........2 Print Roller .............8 Cleaning the Print Roller ......8...
  • Page 2: Maintenance And Cleaning

    11/08 Rev. 5.01-01 USER MANUAL Maintenance & Cleaning AP 4.4 – AP 5.4 General Notice Maintenance by Qualified Personnel Regular technical maintenance is required to ensure that the device is always in operating order. Maintenance work should only be carried out by qualified personnel. The Qualifications safety, reliability and longevity of the device depend on correct maintenance.
  • Page 3: Ordering Spare Parts

    11/08 Rev. 5.01-01 USER MANUAL Maintenance & Cleaning AP 4.4 – AP 5.4 Ordering Spare Parts CAUTION! - Using parts that do not meet the manufacturer’s high standards may damage the machine. Only use original spare parts supplied by the manufacturer.
  • Page 4 11/08 Rev. 5.01-01 USER MANUAL Maintenance & Cleaning AP 4.4 – AP 5.4 Printhead cleaning pen (left) and roller cleaner (right).
  • Page 5: Printhead

    11/08 Rev. 5.01-01 USER MANUAL Maintenance & Cleaning AP 4.4 – AP 5.4 Printhead CAUTION! - Electrostatic discharge (ESD) or contact with sharp objects If you do not have any professional may damage the printhead! ESD protection equipment (ESD wrist- band, ESD shoes, …), please place one...
  • Page 6 11/08 Rev. 5.01-01 USER MANUAL Maintenance & Cleaning AP 4.4 – AP 5.4 Cleaning with the cleaning paper 1. Cut a strip of cleaning paper matching the printhead width. 2. Insert the cleaning paper (2) into the prin- ter with the rough side facing upwards (Fig.
  • Page 7: Changing The Printhead

    11/08 Rev. 5.01-01 USER MANUAL Maintenance & Cleaning AP 4.4 – AP 5.4 Changing the Printhead Fig. 1: Printhead (1) with bracket (2). CAUTION! - Printhead (1) and brak- ket (2) were adjusted exactly by me- ans of special positioning tools.
  • Page 8: Print Roller

    11/08 Rev. 5.01-01 USER MANUAL Maintenance & Cleaning AP 4.4 – AP 5.4 Print Roller Cleaning the Print Roller Contamination on the print roller can de- grade the quality of the print and the trans- port of the material. 1. Switch off the printer and disconnect from the power 2.
  • Page 9 11/08 Rev. 5.01-01 USER MANUAL Maintenance & Cleaning AP 4.4 – AP 5.4 2. Place the axle in the socket (4) and gently rotate until the flat part of the axle is under the set screw (2). 3. Press the print roller firmly into the socket.
  • Page 10: Punch Sensor

    11/08 Rev. 5.01-01 USER MANUAL Maintenance & Cleaning AP 4.4 – AP 5.4 Punch Sensor During printing the punch sensor can beco- me contaminated with lint. Large amounts of dirt can lead to problems with perforation recognition. To free the punch sensor from dust and ab- raded particles: 1.
  • Page 11: Index

    11/08 Rev. 5.01-01 USER MANUAL AP 4.4 – AP 5.4 Index Cleaning Agents Qualification ESD protection Roller cleaner Frequency for maintenance Safety Spare Parts Head resistance Transmission sensor Troubleshooting Print roller Printhead...

This manual is also suitable for:

Ap 5.4

Table of Contents