04/13 Rev. 5.08-02
Connecting to the mains
power supply
WARNING!
The machine is connected with the mains supply! Contact with energised components
can result in life-endangering currents through the body as well as burns.
aware of the risks involved.
The machine side power plug has a definite phase position.
Power switch = Separator
machine, an additional accessible power switch must be installed.
SERVICE MANUAL
The mains connection may only be performed by authorised specialists who are
Ensure that the machine is switched off before connecting the power cable.
Only operate the machine using the system voltage indicated on the nameplate.
The length of the power cable must not exceed 3 m.
Pay attention to the phase position when connecting the machine.
If the power switch can not be accessed, e.g. due to the mounting position of the
Connecting to the mains power supply
ALX 73x
23