06/15 Rev. 03
Mounting the U-RX
Two persons are required to lift it.
Try to lift the unit in a safe way, for example by
Do not use the deflection rollers and dancer arms as handles when lifting.
Grip under the base plate to lift the unit.
The base needs to be at least the same size as the unit itself.
The surface needs to be level, solid and dry.
The environmental conditions specified (temperature, air humidity, etc.)
The power cable should not be more than 3 meters long.
Make sure that the power supply socket for the device is readily accessible!
In case of emergency, switch off the device and disconnect the power
OPERATING INSTRUCTIONS
Lifting
WARNING!
The U-RX may weight up to 38 kg. Lifting it improperly can cause back
injury.
– carrying it close to your body, by
– bending your knees, and by keeping your back straight.
CAUTION! To avoid damaging the unit:
Mounting
The U-RX is designed for rewinding and unwinding rolls of label material.
Device orientation: Standing on the base plate[1].
WARNING!
When choosing a base, observe the following guidelines to avoid
dangerous operating conditions:
need to be complied with.
The device can only be disconnected completely by pulling off the power
supply cable. For this reason:
supply cable!
U-RX
Setting up, operation
2