Table of Contents
Advertisement
Display messages
Notes on display messages
G
WARNING
If the instrument cluster has failed or mal-
functioned, you may not recognise function
restrictions relevant to safety. The operating
safety of your vehicle may be impaired. There
is a risk of an accident.
Drive on carefully. Have the vehicle checked
at a qualified specialist workshop immedi-
ately.
Display messages and warnings from certain
systems are displayed in the multifunction dis-
play. You should therefore make sure your vehi-
cle is operating safely at all times. If the oper-
ating safety of your vehicle is impaired, stop the
vehicle as soon as possible, paying attention to
road and traffic conditions. Then contact a quali-
fied specialist workshop.
Display messages with graphic symbols are sim-
plified in the Operating Instructions and may
differ from the symbols in the multifunction dis-
play. The multifunction display shows high-pri-
Display messages
ority display messages in red. A warning tone
sounds with certain display messages.
Please respond in accordance with the display
messages and follow the additional notes in
these Operating Instructions.
You can hide low-priority display messages by
pressing the a or % button. The display
messages are then stored in the message mem-
ory. Rectify the cause of a display message as
soon as possible.
High-priority display messages cannot be hid-
den. These display messages will continue to be
shown in the multifunction display until their
cause has been rectified.
Calling up stored display messages
On-board computer:
+
Service
Service
*
X
If there are no display messages,
sages
sages
appears in the multifunction display.
Press : or 9 to scroll through the dis-
X
play messages.
To exit the message memory: press the
X
% button.
Messages
Messages
No mes‐
No mes‐
Z
231
Advertisement
Table of Contents
