Table of Contents
Advertisement
Replacing light bulbs
84
Changing courtesy exit lamp light bulbs
Requirements
Light bulb type HT D6 3.4 W
R
The lighting system is deactivated.
R
i
The courtesy light is located inside the driv-
er's and co-driver's door.
Open the corresponding door.
X
Remove the cover :.
X
Pull the light bulb out of the socket.
X
Insert the new light bulb into the socket, so
X
that the base of the lamp is resting fully on the
bottom of the socket.
Insert the cover and press down firmly.
X
Changing light bulbs for the interior
light
Requirements
Light bulb type 12V8WAL 8 W
R
The lighting system is deactivated.
R
Slide a suitable tool in the gap = between the
X
cover : and the switch ;. Cover the tip of
the tool with a cloth in order to prevent dam-
age.
Carefully prise off the cover :.
X
Gently press the front holder ? in the direc-
X
tion of the arrow.
Pull the light bulb A out of the socket at an
X
angle.
First insert the new light bulb in the rear
X
holder B.
Release the front holder ?.
X
Insert the cover and press down firmly :.
X
Advertisement
Table of Contents
